Mobile 120 | Mobile Betonmischanlage

CONSTMACH MOBILE 120 Mobile Betonmischanlage besteht aus zwei verschiedenen mobilen Aufliegern. Während einer der Auflieger nur den Zuschlagstoffbunker und das Wiegesystem enthält, umfasst der andere das Transportband und die Mischgruppe.

TRANSPORTPOSITIONTRANSPORTPOSITION
AUFGEBAUTE POSITIONAUFGEBAUTE POSITION

Die mobile Betonmischanlage CONSTMACH MOBILE 120 erfordert nur minimale Baustellenvorbereitung. Ein ebener Untergrund, der die Gesamtlast der Anlage tragen kann, ist ausreichend.

In den Betonmischanlagen MOBILE 120 werden Doppelwellenmischer mit 3 m3 Nassbetonvolumen eingesetzt.

DOPPELWELLENMISCHER

Anders als andere mobile Betonmischanlagen verfügt die MOBILE 120 über kein internes Zementsilo am Fahrgestell. Externe Zementsilos mit einer Lagerkapazität von 75 bis 500 Tonnen können zusammen mit diesem Modell verwendet werden. Wird der Zement in Säcken geliefert, lässt er sich über eine in die MOBILE 120 integrierte Big-Bag-Öffnungs- und Silobefüllanlage einfach in die Silos einfüllen.

VERSCHIEDENE SILOTYPEN UND KAPAZITÄTSOPTIONEN

Zuschlagstoff-Vordosiersysteme sind unsere Alternative zu den Beschickungsrampen, die zum Befüllen der Bunker mit Radladern erforderlich sind. Beim Einsatz von Zuschlagstoff-Vordosiersystemen entfällt die Notwendigkeit einer Beschickungsrampe.

ZUSCHLAGSTOFF-VORDOSIERSYSTEM

Die MOBILE 120 ist mit einem Hightech-Automatisierungssystem ausgestattet, das erstklassige elektronische Komponenten der Marken SIEMENS & SCHNEIDER sowie eine PLC umfasst. Das gesamte System wird über eine fortschrittliche Software mit ausgefeilten Funktionen und einer benutzerfreundlichen Oberfläche gesteuert.

VOLLAUTOMATISCHES STEUERUNGSSYSTEM
04
EINFACHER TRANSPORT

Mobile 120 Technische Daten

Produktionsleistung120 m³/h
Abmessungen in Transportstellung1. Chassis: 14.9(L) x 3(B) x 4(H) Meter, 2. Chassis: 14(L) x 3(B) x 3.9(H) Meter
Gewicht55 Tonnen
Gesamtmotorleistung200 kW
Erforderliche Generatorleistung300 kVA
MischeroptionenDoppelwellenmischer
Erforderliche Aufstellfläche500 m²
Zuschlagstoffbunker-Volumen4 x 30 m³
Zuschlagstoff-Wiegebehälter4.5 m³
Zuschlagstoff-Wiegeband1.000 x 11.100 mm
Zuschlagstoff-Transportband1.000 x 15.800 mm
Nassbeton-Mischervolumen3 m³
Zement-Wiegebehälter1.800 kg
Wasser-Wiegebehälter900 lt
Zusatzmittel-Wiegebehälter50 lt
Luftkompressor500 lt, 5.5 kW
Zementsilo – Option 2Optional von 75 bis 500 Tonnen Kapazität.
SteuerungstypVOLLAUTOMATISCH

Mobile 120 Transport

Mobile 120 | Mobile Betonmischanlage – Transport

Mobile 120Video

Mobile 120 Gesamtanordnung

FAQ

Mobile 120 is purchased by contractors who follow projects across multiple sites in a single season — highway construction crews, regional precast distributors, and ready-mix operators serving short-term jobsite contracts. The mobile chassis is the key advantage: a project that lasts 6 months no longer requires a 3–4 week site-preparation phase before first concrete production. Mobile 120 is on site and producing within hours of arrival.

What Mobile 120 Produces

Mobile 120 produces ready-mixed concrete at a rated capacity of 120 m³/h. The configurable mixer (selected at the engineering stage) covers ready-mix concrete (low and high slump), dry-mix concrete, precast feedstock and specialty mixes. The chassis-mounted cement silo (as specified) holds enough stock for typical jobsite operation; external silos are added where higher buffer capacity is required.

Suitability Factors

Mobile 120 suits jobsites with: a flat load-bearing pad of approximately 500 m², road access for the single-trailer delivery, electrical supply matching 300 kVA, and water supply. Sites without these basics still benefit from the mobile design — temporary supply (diesel generator, water bowser) can be provided alongside, and Mobile 120 starts producing while permanent utilities are being installed.

Operating Considerations

Mobile 120 requires standard maintenance — daily walkaround checks, weekly grease points, monthly wear-plate inspection, quarterly overhauls. The road-legal chassis dimensions (1st chassis: 14.9(L) x 3(W) x 4(H) meters2nd chassis: 14(L) x 3(W) x 3.9(H) meters) allow movement between jobsites without disassembly and without special-load permits in most countries. Movement preparation is typically a single shift: drain the cement silo, disconnect utilities, fold any extendable elements, drive away.

Comparison To Alternatives

Compared to stationary plants, Mobile 120 sacrifices peak capacity for mobility — for projects that move every 6–12 months, the lifetime cost-per-cubic-metre is lower despite the higher capital cost. Compared to compact stationary plants, Mobile 120 eliminates the foundation pad and is genuinely transportable as a single unit. For projects that stay on one site for multiple years, a stationary or compact plant is generally more economical.

Frequently Asked Questions

whatsapp gorsel 2024 01 10 saat 15 28 30 bf9fc1cb 9474
Schnellkontakt

Hinterlassen Sie eine Anfrage, und unser Expertenteam wird sich so schnell wie möglich bei Ihnen melden

Füllen Sie das Formular aus, um ausführliche Informationen über Betonmischanlagen, Brech- und Siebanlagen oder unsere anderen Produkte zu erhalten – oder kontaktieren Sie uns direkt.

Mit dem Absenden einer Anfrage stimmen Sie der Verarbeitung Ihrer personenbezogenen Daten zu.

oder direkt

Was gibt es Neues bei Constmach

Unser Expertenteam steht bereit, um eine auf Ihr Projekt zugeschnittene Lösung zu bieten. Wir sind nur einen Anruf entfernt — rufen Sie uns jetzt an.